Best Publications

1. Saikat Suman, Kaushik Pal, Santanu Chattopadhyay, Anil K Bhowmick, “3-Octanoylthio-1-propyltriethoxysilane functionalized silica/rubber composites for application in tire: Structure, performance and synergism”, Polymer Composites, 2022 – Accepted.
2. Arekh Sharma, Subhash Singh, Kaushik Pal, “Investigation of microstructural and mechanical properties of Al alloy 7075-T6/B4C nanocomposite concocted via Friction stir process”, Ceramics International, 2022 – DOI: 10.1016/j.ceramint.2022.06.212.
3. Barkha Singh, Swati Singh, Abhishek Gautam, Andrew J. Sutherland, Kaushik Pal, “Preparation and characterization of PLA microspheres as drug delivery system for controlled release of Cetirizine with carbon dots as drug carrier”, Polymer Bulletin – DOI: 10.1007/s00289-022-04331-x.
4. Keerti Rathi, A. Naveen Kumar, Kaushik Pal, “Fabrication of delaminated two-dimensional (2D) metal carbide MXenes (Nb2CTx) by CTAB based NO2 gas sensor with enhanced stability”, Advanced Materials Interfaces, Volume 7, Issue 12, 2022 – DOI: 10.1002/admi.202200415.
5. Joy Saha, Kaushik Pal, “Investigation on Mechanical, Biocorrosion and Biocompatibility Behaviour of HAp Assisted Sr Based Mg Composites”, ACS Applied Bio Materials, 2022, 5, 6, 2608–2621 – DOI: 10.1021/acsabm.2c00093.
6. A. Naveen Kumar, Kaushik Pal, “Amine functionalized stable Nb2CTx MXene towards room temperature ultrasensitive NO2 gas sensor”, Materials Advances – DOI: 10.1039/d2ma00301e.
7. Swati Singh, Chandrachur Ghosh, Partha Roy, Kaushik Pal, “Biosynthesis of folic acid appended PHBV modified copper oxide nanorods for pH sensitive drug release in targeted breast cancer therapy”, International Journal of Pharmaceutics, Volume 622, 2022, 121831 – DOI: 10.1016/j.ijpharm.2022.121831.
8. Vivek Verma, Joy Saha, Kaushik Pal, “Investigation on Microstructure, Mechanical, Biocorrosion and Biocompatibility Behavior of Nano-sized [email protected] Reinforced Mg-HAp Composites”, Journal of Alloys and Compounds, April 2022 – DOI: 10.1016/j.jallcom.2022.164866.
9. Jitendra Bahadur, Amir H. Ghahremani, Blake Martin, Sahar Pishgar, Mahendra K Sunkara, Thad Druffel, Kaushik Pal, “Solution processed Cu:SnO2 as an efficient electron transport layer for fabrication of low temperature planar perovskite solar cell under ambient conditions”, IEEE Journal of Photovoltaics, March 2022 – Accepted.

10. Vivek Verma, Kaushik Pal, “A Finite Element Investigation on the Design of Mechanically Compatible Functionally Graded Orthopaedic Plate for Diaphyseal Tibia Transverse Fracture”, Composites Part C: Open Access, Volume 7, March 2022, DOI: 10.1016/j.jcomc.2022.100228.
11. Suruj Neog, Subhash Singh, Navneet Arora, Kaushik Pal, “Influence of nanofillers on mechanical and microstructural analysis of friction stir welded dissimilar aluminium alloys”, Journal of Materials Research and Technology – Communicated.

12. Vivek Verma, Kaushik Pal, "Experimental and numerical investigation on ZnP based composite materials for internal fixation of tibia midshaft fracture: A comprehensive study", Surface and Coatings Technology, Volume 447, 15 October 2022, 128785, DOI: https://doi.org/10.1016/j.surfcoat.2022.128785.

  • Nidhi Pal, Somesh Banerjee, Partha Roy, Kaushik Pal, “Cellulose nanocrystals-silver nanoparticles-reduced graphene oxide based hybrid PVA nanocomposites and its antimicrobial properties”, International Journal of Biological Macromolecules, Volume 191, 30 November 2021, Pages 445-456 – DOI: 10.1016/j.ijbiomac.2021.08.237.
  • Tushar Roy, Sunil Wanchoo, Kaushik Pal, “Synergetic proton-conducting effect of sulfonated PEEK-MO2-CNT membranes for PEMFC applications”, Ionics, 27, pages4859–4873 (2021) – DOI: 10.1007/s11581-021-04259-8.
  • Pushpendra Singh, Bilen Akuzum; Christopher E. Shuck, Kaushik Pal, Yury Gogotsi; E. Caglan Kumbur, “MXene-based Suspension Electrode with Improved Energy Density for Electrochemical Flow Capacitors”, Journal of Power Sources, Volume 506, 2021, 230187 – DOI: 10.1016/j.jpowsour.2021.230187.
  • Atul Kumar, Kaushik Pal, Suhrit Mula, “Effects of cryo-FSP on metallurgical and mechanical properties of stir cast Al7075–SiC nanocomposites”, Journal of Alloys and Compounds, Volume 852, 2021, 156925 – DOI: 10.1016/j.jallcom.2020.156925.
  • Vinay Panwar, Vijay Pandey, Kaushik Pal, “Dynamic mechanical and EWF study of reactive organo-montmorillonite and carbon black filled polyurethane nanocomposites”, Polymer-Plastics Technology and Materials, 60, 9, Pages 962-973, 2021 – DOI: 10.1080/25740881.2020.1869779.
  • Manmeet Kaur, Kaushik Pal, “Synthesis, Characterization and Electrochemical Evaluation of Hydrogen Storage Capacity of Graphitic Carbon Nitride and Its Nanocomposites in an Alkaline Environment”, J Mater Sci: Mater Electron, 2021 – DOI: 10.1007/s10854-021-05882-x.
    2020-

  • Keerti Rathi and Kaushik Pal , “Wireless hand-held device based on polylactic acid protected, highly stable, CTAB functionalized phosphorene for CO2 gas sensing”, ACS Applied Materials and Interfaces, 2020, DOI:10.1021/acsami.0c10285.
  • Keerti Rathi and Kaushik Pal , “Ruthenium decorated tungsten disulfide quantum dots for CO2 gas sensor”, Nanotechnology, 2020, DOI:10.1088/1361-6528/ab5cd3.
  • Keerti Rathi and Kaushik Pal , “Fabrication of MoSe2- Graphene Hybrid Nanoflakes for Toxic Gas Sensor with Tunable Sensitivity”, Advanced Materials Interfaces, 2020, DOI:10.1002/admi.202000140.
  • Keerti Rathi and Kaushik Pal , “Fabrication of flexible La-MoS2 hybrid-heterostructure based sensor for NO2 gas sensing at room temperature", Nanotechnology, 2020, DOI:10.1088/1361-6528/ab9c55.
  • Pushpendra Singh and Kaushik Pal , “Activated carbon-Polyaniline composite active material slurry electrode for high capacitance, improved rheological performance electrochemical flow capacitor”, Electrochimica Acta, 2020, DOI:10.1016/j.electacta.2020.136719.
  • Manmeet Kaur and Kaushik Pal , “Potential Electrochemical Hydrogen Storage in Nickel and Cobalt Nanoparticles induced Zirconia-Graphene Nanocomposite", Journal of Materials Science: Materials in Electronics, 2020, DOI:10.1007/s10854-020-03641-y.
  • Tushar Roy, Sunil Wanchoo and Kaushik Pal , “Novel sulfonated poly (ether ether ketone)/ [email protected] nanohybrid membrane for proton exchange membrane fuel cells, Solid State Ionics, 2020, DOI:10.1016/j.ssi.2020.115296.
  • Vinay Panwar and Kaushik Pal , “Influence of addition of selective metallic species on mechanical properties of graphene/acrylonitrile-butadiene-styrene composites”, Polymer COMPOSITES, 2020, DOI:10.1002/pc.25485.
  • Subash Singh and Kaushik Pal , “Influence of texture evolution on mechanical and damping properties of SiC/Li2ZrO3/Al composite through friction stir processing”, Journal of Engineering Materials and Technology, 2020, DOI:10.1002/pc.25485.

  • Souvik Bag and Kaushik Pal , “Sulfonated poly (ether ether ketone) based carbon dioxide gas sensor: Impact of sulfonation degree on sensing behavior at different humid condition”, Sensors and Actuators: B. Chemical, 2019, DOI:10.1016/j.snb.2019.127115.
  • Souvik Bag and Kaushik Pal , “A PCB Based Chemiresistive Carbon Dioxide Sensor Operating at Room Temperature under Different Relative Humidity”, IEEE Transactions on Nanotechnology, 2019, DOI:10.1109/TNANO.2019.2946837.
  • Jitendra Bahadur, Amir H. Ghahremani, Blake Martin, Sahar Pishgar, Thad Druffel, Mahendra K Sunkara and Kaushik Pal, “A study on the material characteristics of low temperature cured SnO2 films for perovskite solar cells under high humidity”, Journal of Materials Science: Materials in Electronics, 2019, DOI:10.1007/s10854-019-02199-8.
  • Jitendra Bahadur, Amir H. Ghahremani, Blake Martin, Thad Druffel, Mahendra K Sunkara and Kaushik Pal, “Solution processed Mo doped SnO2 as an effective ETL in the fabrication of low temperature planer perovskite solar cell under ambient conditions”, Organic Electronics, January 2019, DOI:10.1016/j.orgel.2019.01.027.
  • Nidhi Pal, Somesh Banerjee, Partha Roy and Kaushik Pal, “Reduced graphene oxide and PEG-grafted TEMPO-oxidized cellulose nanocrystal reinforced poly-lactic acid nanocomposite film for biomedical application”, Materials Science and Engineering: C, Volume 104, 2019, Pages 109956, DOI:10.1016/j.msec.2019.109956.
  • Jitendra Bahadur, Amir H. Ghahremani, Sunil Gupta, Thad Druffel, Mahendra K Sunkara and Kaushik Pal, “Enhanced moisture stability of MAPbI3 perovskite solar cells through Barium doping”, Solar Energy , 2019, Volume 190, 2019, Pages 396-404, DOI:10.1016/j.solener.2019.08.033.
  • Nidhi Pal, Somesh Banerjee, Partha Roy and Kaushik Pal, “Melt-blending of unmodified and modified cellulose nanocrystals with Reduced graphene oxide into PLA matrix for biomedical applications”, Polymers advanced technologies, 2019, Pages 1-12, DOI:10.1002/pat.4736.
  • Manmeet Kaur and Kaushik Pal , “Review on hydrogen storage materials and methods from an electrochemical viewpoint”, Journal of Energy Storage , 2019, Pages 234-249, DOI:10.1016/j.est.2019.03.020.
  • Narayan Debnath, Vinay Panwar, Tushar Roy, Mitali Saha and Kaushik Pal, “Improved dispersion of carbon black in ABS/PANI blend through its acid-functionalization and addition of nanoclay, thereby enhancing mechanical and thermal properties”, Polymer Bulletin, 2019, DOI:10.1007/s00289-019-02979-6.
  • Karavalasu Velusamy Mahesh Kumar, Kasilingam Krishnamurthy, Rathanasamy Rajasekar, Palaniappan Sathish Kumar, Ganesh Chandra Nayak and Kaushik Pal "Influence of graphene oxide on the static and dynamic mechanical behavior of compatibilized polypropylene nanocomposites", Materials Testing, 61, (2019) 10, pages 986-990, DOI:10.3139/120.111411.
  • Pratip Roy, Subhash Singh and Kaushik Pal, “Enhancement of mechanical and tribological properties of SiC and CB reinforced aluminium 7075 hybrid composites through friction stir processing”, Advanced Composite Materials, Volume 28, 2019, Pages 1-18, DOI:10.1080/09243046.2017.1405596.

  • Subhash Singh, Navjot Kaur, Vinay Panwar and Kaushik Pal, “Synthesis and characterization of micro-composites: For enhanced electrochemical properties”, Surfaces and Interfaces, Volume 11, 2018, Pages 107-111, DOI:10.1016/j.surfin.2018.02.002.
  • Subhash Singh, Keerti, and Kaushik Pal, “Synthesis, characterization of graphene oxide wrapped silicon carbide for excellent mechanical and damping performance for aerospace application”, Journal of Alloys and Compounds, Volume 740, 2018, Pages 436-445, DOI:10.1016/j.jallcom.2017.12.069.
  • Navjot Kaur and Kaushik Pal, “A comprehensive review on Triboelectric Nanogenerator as a mechanical energy harvester”, Energy Technology, Volume 6, Issue 6, 2018, Pages 958-9972018, DOI:10.1002/ente.201700639.
  • Atul Kumar, Ashwin Kumar Godasu, Suhrit Mula and Kaushik Pal “Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy”, Materials Characterization, Volume 144, 2018, Pages 440-447, DOI:10.1016/j.matchar.2018.08.001.

  • Vinay Panwar, and Kaushik Pal, “Role of percolation threshold, degree of entanglement, Cole-Cole plot and C-factor to determine optimum filler content in rGO/ABS composites”, Journal of Macromolecular Research, Volume XXX, 2017, Pages XX-XX, DOI:10.1007/s10965-017-1417-y.
  • Vinay Panwar, Ananaya Chattree and Kaushik Pal, “Effect of nanoclay on thermomechanical behaviour of graphene oxide/polymer composites”, Procedia Engineering, Volume XX, 2017, Pages XX-XX.
  • Pushpendra Singh, and Kaushik Pal, “Multiphase nanostructured PANI [email protected] grown MWCNT on rGO coated nickel foam for binder free supercapacitor electrode”, Electrochimica Acta, Volume 242, 2017, Pages 47–55, DOI:10.1016/j.electacta.2017.05.012.
  • Souvik Bag, Keerti Rathi and Kaushik Pal, “Effect of carbon derivatives in sulfonated poly(etherimide)–liquid crystal polymer composite for methanol vapor sensing”, Nanotechnology, Volume 28, 2017, Pages 205501, DOI:10.1088/1361-6528/aa66b6.
  • Vinay Panwar, and Kaushik Pal, “An optimal reduction technique for rGO/ABS composites having high-end dynamic properties based on Cole-Cole plot, degree of entanglement and C-factor”, Composites Part B: Engineering, Volume 114, 2017, Pages 46-57, DOI:10.1016/j.compositesb.2017.01.066.
  • Keerti, and Kaushik Pal, “Impact of Doping on GO: Fast Response–Recovery Humidity Sensor”, ACS Omega, Volume 3(2), 2017, Pages 842-851, DOI:10.1021/acsomega.6b00399.
  • Navjot Kaur, and Kaushik Pal, “Enhanced magnetic properties of cobalt-doped graphene nanoribbons”, Applied Physics A, Volume 123, 2017, Page 259, DOI:10.1007/s00339-017-0893-6.
  • Jitendra Bahadur, and Kaushik Pal, “Structural and magnetic properties of reduced graphene oxide-TiO2 nanoflower composite”, Physica E: Low-dimensional Systems and Nanostructures, Volume 90, 2017, Pages 98-103, DOI:10.1016/j.physe.2017.02.022.
  • Barkha Singh, Pushpendra Singh, Andrew J. Sutherland, and Kaushik Pal, “Control of shape and size of poly (lactic acid) microspheres based on surfactant and polymer concentration”, Materials Letters, Volume 195, 2017, Pages 48-51, DOI:10.1016/j.matlet.2017.02.068.
  • Pankaj Sharma, Vinay Panwar, A. P. Kharitonov, and Kaushik Pal, “Effect of nanoclay on carbon black reinforced blend of amorphous–semicrystalline polymers”, Polymer Bulletin, 2016, Pages 1-11, DOI:10.1007/s00289-016-1887-9.
  • Subhash Singh, and Kaushik Pal, “Influence of surface morphology and UFG on damping and mechanical properties of composite reinforced with spinel MgAl2O4-SiC core-shell microcomposites”, Materials Characterization, Volume 123, 2017, Pages 244-255, DOI:10.1016/j.matchar.2016.11.042.
  • Subhash Singh, Keerti, and Kaushik Pal, “Synthesis, characterization of graphene oxide wrapped silicon carbide for excellent mechanical and damping performance for aerospace application”, Journal of Alloys and Compounds, Volume 740, 2018, Pages 436-445, DOI:10.1016/j.jallcom.2017.12.069.
  • Navjot Kaur and Kaushik Pal, “A comprehensive review on Triboelectric Nanogenerator as a mechanical energy harvester”, Energy Technology, Volume 6, Issue 6, 2018, Pages 958-9972018, DOI:10.1002/ente.201700639.
  • Atul Kumar, Ashwin Kumar Godasu, Suhrit Mula and Kaushik Pal “Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy”, Materials Characterization, Volume 144, 2018, Pages 440-447, DOI:10.1016/j.matchar.2018.08.001.

  • Navjot Kaur, Jitendra Bahadur, Vinay Panwar, Pushpendra Singh, Keerti Rathi, and Kaushik Pal, “Effective energy harvesting from a single electrode based triboelectric nanogenerator”, Nature-Scientific Reports, Volume 6, 2016, 38835, DOI:10.1038/srep38835.
  • Nidhi Pal, Poornima Dubey, P. Gopinath, and Kaushik Pal, “Combined effect of cellulose nanocrystal and reduced graphene oxide into poly-lactic acid matrix nanocomposite as a scaffold and its anti-bacterial activity”, International Journal of Biological Macromolecules, Volume 95C, 2017, Pages 94-105, DOI: 10.1016/j.ijbiomac.2016.11.041.
  • Manmeet Kaur, and Kaushik Pal, “An investigation for hydrogen storage capability of zirconia-reduced graphene oxide nanocomposite”, International Journal of Hydrogen Energy, Volume 41, Issue 47, 2016, Pages 21861-21869, DOI:10.1016/j.ijhydene.2016.09.129.
  • Jitendra Bahadur, Pushpendra Singh, Vinay Panwar, and Kaushik Pal, “Catalytic action of graphene oxide towards the growth of carbon nanotubes”, Materials Letters, Volume 178, 2016, Pages 292-295, DOI: 10.1016/j.matlet.2016.05.022.
  • Gangaram Mandoloi, Subhash Singh, Pradeep Kumar, and Kaushik Pal, “Effect on crystalline structure of AISI M2 steel using Tungsten-Thorium electrode through MRR, EWR, and surface finish”, Measurement, Volume 90, 2016, Pages 74–84, DOI: 10.1016/j.measurement.2016.04.041.
  • Jitendra Bahadur, Shraddha Agrawal, Vinay Panwar, Azra Parveen, and Kaushik Pal, “Antibacterial properties of silver doped TiO2 nanoparticles synthesized via Sol-gel technique”, Macromolecular Research, Volume 24, 2016, Pages 488-493, DOI: 10.1007/s13233-016-4066-9.
  • Vinay Panwar, Jitender Bahadur, and Kaushik Pal, “An optimum method for uniform synthesis of zirconia on reduced graphene oxide”, Advanced Powder Technology, Volume 27, Issue 2, 2016, Pages 728–733, DOI: 10.1016/j.apt.2016.02.035.
  • Kaushik Pal, “Effect of different nanofillers on mechanical and dynamic behaviour of PMMA based nanocomposites”, Composites Communications, Volume 1, 2016, Pages 25–28, DOI: 10.1016/j.coco.2016.08.001.
  • Tanima Bhattacharya, Ajoy K. Chakraborty, and Kaushik Pal, “Computer Simulation of the Influence of Shading on Solar Photovoltaic Array”, International Journal of Ambient Energy, 2016, DOI: 10.1080/01430750.2016.1155484.

  • Subhash Singh, and Kaushik Pal, “Effect of surface modified silicon carbide particles with Al2O3 and nanocrystalline spinel ZnAl2O4 on mechanical and damping properties of the composite”, Materials Science & Engineering A, Volume 644, 2015, Pages 325–336, DOI:10.1016/j.msea.2015.07.057.
  • Narayan Debnath, Vinay Panwar, Souvik Bag, Mitali Saha, and Kaushik Pal, “Effect of carbon black and nanoclay on mechanical and thermal properties of ABS-PANI/ABS-PPy blends”, Journal of Applied Polymer Science, Volume 132, Issue 38, 2015, 42577 DOI: 10.1002/app.42577.
  • Subhash Singh, and Kaushik Pal, “Effect of surface modification on silicon carbide particles with nanocrystalline spinel LZO for enhanced damping and mechanical property”, Materials and Design, Volume 82, 2015, Pages 223–237, DOI: 10.1016/j.matdes.2015.05.076.
  • Vinay Panwar, Ananya Chetri, and Kaushik Pal, “A new facile route for synthesizing of graphene oxide using nitric acid-sulphuric acid as intercalating agent”, Physica E: Low-dimensional Systems and Nanostructures, Volume 73, 2015, Pages 235–241, DOI:10.1016/j.physe.2015.06.006.
  • Kaushik Pal, Vinay Panwar, Sven Friedrich, and Michael Gehde, “An investigation on vibration welding of thermoplastic-thermoplastic and thermoplastic-semicrystalline materials”, Materials and Manufacturing Processes, Volume 31, 2015, Pages 372-378, DOI: 10.1080/10426914.2015.1019111.
  • Kaushik Pal, and Jin Kuk Kim, “Role of fillers on halloysite nanotube and clay assisted dispersion of fluoroelastomeric based high performance dielectric energy storage application”, Journal of Nanoscience and Nanotechnology, Volume 15, Number 5, 2015, Pages 3641-3651, DOI:10.1166/jnn.2014.9529.
  • Gangaram Mandoloi, Subhash Singh, Pradeep Kumar, and Kaushik Pal, “Effect on crystalline structure of AISI M2 steel using copper electrode through material removal rate, electrode wear rate and surface finish”, Measurement, Volume 61, 2015, Pages 305-319, DOI: 10.1016/j.measurement.2014.10.057.
  • Kaushik Pal, Vinay Panwar, Souvik Bag, James P Manuel, Jou-Hyeon Ahn, and Jin Kuk Kim, “Graphene oxide/polyaniline/polypyrrole nanocomposite for a supercapacitor electrode”, RSC Advances, Volume 5, 2015, Pages 3005-3010, DOI: 10.1039/C4RA14614J.
  • Pankaj Sharma, Vinay Panwar, and Kaushik Pal, “Clay assisted dispersion of carbon black in thermoplastic nanocomposites”, Journal of Applied Polymer Science , Volume 132, Issue 7, 2015– DOI: 10.1002/APP.41477.

  • Kaushik Pal, Madhumita Mukherjee, Stanislaw Frackowiak, Marek Kozlowski, and Chapal K. Das, “Improvement of Physico-Mechanical Properties and stability of Waste PP in presence of Wood Flour and MAH-g-PP”, Journal of Vinyl and Additive Technology, Volume 20, Issue 1, 2014, Pages 24–30, DOI: 10.1002/vnl.21325.
  • Kaushik Pal, Jin Kuk Kim, Enhanced Electrical and Mechanical Properties of Nanotube Reinforced Composites, ASME 2013 International Mechanical Engineering Congress and Exposition, ASME Proceedings- Emerging Technologies, Volume 11: Emerging Technologies, Paper No. IMECE2013-64249, San Diego, California, USA, November 15-21, 2013, pp. V011T06A019; 4 pages, doi: 10.1115/IMECE2013-64249.
  • Kaushik Pal, Samir K. Pal, Chapal Kumar Das, and Jin Kuk Kim, “Effect of fillers on morphological and wear characteristics of NR/HSR blends with E-glass fibre”, Materials and Design, Volume 35, Issue R1-R2, 2012, Pages 863-872, DOI: 10.1016/j.matdes.2011.07.074.
  • Kaushik Pal, Dong Jin Kang, and Jin Kuk Kim, “Microstructural investigations of zirconium oxide– on core-shell structure of carbon nanotubes”, Journal of Nanoparticle Research, Volume 13, Number 6, Pages 2597-2607, DOI: 10.1007/s11051-010-0152-7.
  • Kaushik Pal, Samir K. Pal, Chapal Kumar Das, and Jin Kuk Kim, “Effect of fillers on morphological properties and wear characteristics of XNBR/NR blends”, Journal of Applied Polymer Science, Volume 120, Issue 2, 2011, Pages 710–718, DOI: 10.1002/app.33234.
  • Kaushik Pal, Samir K. Pal, C. K. Das, and Jin Kuk Kim, “Relationship between normal load and dynamic co-efficient of friction on rock-rubber wear mechanism”, Materials and Design, Volume 31, Issue 10, 2010, Pages 4792-4799, DOI: 10.1016/j.matdes.2010.05.006.
  • Kaushik Pal, Samir K. Pal, Chapal Kumar Das, and Jin Kuk Kim, “Influence of fillers on NR/SBR/XNBR blends. Morphology and Wear”, Tribology International, Volume 43, Issue 8, 2010, Pages 1542-1550, DOI:10.1016/j.triboint.2010.02.015.
  • Kaushik Pal, Dong Jin Kang, Zhen Xiu Zhang, and Jin Kuk Kim, “Synergistic Effects of Zirconia-coated Carbon Nanotube on Crystalline Structure of Polyvinylidene fluoride nanocomposites: Electrical Properties and Flame-Retardant Behavior”, Langmuir, Volume 26, Issue 5, 2010, Pages 3609-3614, DOI: 10.1021/la903022j.
  • Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, Samir K. Pal, Chapal Kumar Das, and Jin Kuk Kim, “Influence of carbon blacks on Butadiene rubber/ High styrene rubber/ Natural rubber with nano silica: Morphology and Wear”, Materials and Design, Volume 31, Issue 3, 2010, Pages 1156-1164, DOI: 10.1016/j.matdes.2009.09.037.
  • Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, Samir K. Pal, Chapal Kumar Das, and Jin Kuk Kim, “Effect of fillers on Natural Rubber/ High Styrene Rubber blends with nano silica: Morphology and Wear”, Materials and Design, Volume 31, Issue 2, 2010, Pages 677-686, DOI: 10.1016/j.matdes.2009.08.014.
  • Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, Samir K. Pal, Jin Kuk Kim, and Chapal Kumar Das, “Effect of fillers and nitrile blended PVC on NR/HSR with nano silica blends: Morphology and Wear”, Materials and Design, Volume 31, Issue 1, 2010, Pages 25-34, DOI: 10.1016/j.matdes.2009.07.023.
  • Kaushik Pal, R. Rajasekar, Samir K. Pal, Jin Kuk Kim, and Chapal Kumar Das, “Influence of fillers on NR/SBR blends containing ENR-Organoclay nanocomposites: Morphology and Wear”, Journal of Nanoscience and Nanotechnology, Vol.10, Issue 5, 2010, Pages 3022–3033, DOI:10.1166/jnn.2010.2170.
  • Kaushik Pal, R. Rajasekar, T. Das, Dong Jin Kang, Samir K. Pal, Jin Kuk Kim, and Chapal Kumar Das, “Effect of fillers on morphological properties in NR/SBR blends for OTR tyres”, Plastic, Rubber and Composites-Macromolecular Engineering, Volume 38, No. 7, 2009, Pages 302-308, DOI: 10.1179/174328909X435393.
  • Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, Jin Kuk Kim, and Chapal Kumar Das, “Effect of Epoxidized Natural Rubber-Organoclay nanocomposites on NR/High Styrene Rubber blends with fillers”, Materials and Design, Volume 30, Issue 10, 2009, Pages 4035-4042, DOI:10.1016/j.matdes.2009.05.021.
  • Kaushik Pal, T. Das, R. Rajasekar, Samir K. Pal, and Chapal Kumar Das, “Wear characteristics of styrene butadiene rubber/natural rubber tyre retreading blends with different types of carbon black by DIN abrader and different mining rock surfaces”, Journal of Applied Polymer Science, Volume 111, Issue 1, 2009, Pages 348-357, DOI: 10.1002/app.29128.
  • Kaushik Pal, T. Das, Samir K. Pal, and Chapal Kumar Das, “Use of carboxylated nitrile rubber and natural rubber blends as retreading compound for OTR tyres”, Polymer Engineering and Science, Volume 48, No. 12, 2008, Pages 2410-2417, DOI: 10.1002/pen.21196.